CCME converting SIP to SCCP

mrugeshpatel_2 · ‎11-19-2007

Hello,

I have a 2811 router that has CME 4.1 archived on. SCCP phones register fine, but there is a 7960 phone that was previously used as SIP.

How can I convert this SIP phone to SCCP and register with CCME?

Thanks

paolo bevilacqua · ‎11-19-2007

For a 7960, just configure an ephone with corresponding mac-address and type and load under telephony service. Make sure you have all the SCCP files correctly configured with "tftp-server". That should be enough to upgrade the phone.

Hope this helps, please rate post if it does!

mrugeshpatel_2 · ‎12-03-2007

I have tftp configured will all the files, but it is still not picking up the sccp load.

paolo bevilacqua · ‎12-03-2007

Also configure an ephone with correct mac-address and type.

If still no go, collect "debug tftp events" with "term mon".