HI Prakash, [Pls Rate if HELPS]
>>Enable the HTTP server. For example:
(config)# ip http server
>>Configure the authentication method for the HTTP server. For example, if your authentication method is local:
(config)# ip http authentication local
If you do not configure an authentication method, the HTTP server uses the enable password for authentication by default. You can use RADIUS for HTTP server authentication. For example:
(config)# aaa new-model
(config)# aaa authentication login default group radius
(config)# aaa authorization exec default group radius
(config)# ip http authentication aaa
Pls Rate if HELPS
Best Regards,
Guru Prasad R
