Outgoing calls not working on the VG224

Unanswered Question
Nov 20th, 2007
User Badges:

Hi guys,

I'm able to receive calls from the vg224, but i can't make calls. Is there anybody familiar with this problem?

By the way my vg224 is connected to a CME.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
kumar.vijayarajan_2 Thu, 11/22/2007 - 04:23
User Badges:


If you are using the H.323 configuration, check whether you have configured the correct

dial-peers with right destination pattern on VG224 and CME.



valides007 Mon, 11/26/2007 - 07:35
User Badges:

I'm using SCCP. Regarding the destination pattern on VG224 i had to take it off, because when i tried to enable stcapp it didn't allow me saying that you can't have stacpp and destination pattern.

valides007 Tue, 11/27/2007 - 07:10
User Badges:

As i explained b4, while i'm recieving calls through the vg224 i'm not able to make calls.

Here is a copy of some of the configuration on the VG224 and the CME. Hope it will give you an idea about the problem:


ccm-manager config server

ccm-manager config

ccm-manager sccp local FastEthernet 0/0

ccm-manager sccp



sccp local FastEthernet 0/0

sccp ccm identifier 1



sccp ccm group 1

bind interface FastEthernet 0/0

associate ccm 1 priority 1



dial-peer voice 1 pots

service stcapp

port 2/0

forward-digits all



voice-card 0





voice service pots


voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12



registrar server expires max 3600 min 3600




voice class codec 1

codec preference 1 g729br8


sccp ccm priority 1

sccp ccm group 1


This Discussion