11-20-2007 10:02 AM - edited 03-09-2019 07:26 PM
Hi everyone...
I'm trying to trace some specifics packets as they leave my "public" interface on my router. I've used the "capture" command on PIX/ASA IOS for this porpoise but I can not find something similar on the Cisco IOS. Does anyone knows how can I do this ?
Thank you
11-20-2007 11:49 AM
You can use debug, however you should use it with an ACL (like the PIX).
http://articles.techrepublic.com.com/5100-1035_11-5917591.html
HTH and please rate.
11-20-2007 12:47 PM
sweet!!! that was what i was looking 4...
Thx a bunch my friend
Glenn
11-20-2007 12:54 PM
Glad it helped, thanks for the rating.
11-20-2007 01:16 PM
IP traffic export/capture can be helpful. This is quite limited depending on your hardware and IOS version e.g. software platforms only, but closest alternative to real a capture
Originally in 12.3T http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801d1cab.html
Updated in 12.4T
http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080780575.html
11-20-2007 01:19 PM
Thx for the heads-up...
I'll definitively take that into account...
B safe
Glenn
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: