srst in router & call manager

Jayesh Prajapati · ‎11-20-2007

here is my question

cisco 3560 layer switch with 5 diff vlans in switch one vlan is voice vlan out of 5 vlans my ip phone gataway is voice vlan ip address .In oder to configure srst in router and callmanager which we should give ie voice vlan ip address or router fast ethernet ip address?

allan.thomas · ‎11-22-2007

The IP Address you specify for the SRST reference within CallManager should be the IP address you have assigned to your Voice gateway.

This would ordinarily be your loopback IP address if configured and reachable. Or alternatively your FastEthernet IP address.

Unless of course you have a trunk interface configured on the voice-gateway in which case you would specify the voice-vlan sub-interface.

Regards

Allan.

Pls rate this post if you find it helpful.