VPN Site-to-site with PIX 501 and Linogate Defendo

Unanswered Question
Nov 20th, 2007
User Badges:

Hello,


I have to connect a PIX 501 with a Linogate Defendo (Linux Firewall) using VPN IPSec.

It doesn't really work i don't no why.

The pix has much more preferences which can be changed.

Many preferences of the Linogate Defendo are not visable and there's also no detailed Documentation of this Friewall.

Are there some generall preferences which must be changed by connecting to such a Linux-based Firewall?

It is very hard to get Information from Linogate itself, so i hope somebody here can help!

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vkapoor5 Mon, 11/26/2007 - 15:23
User Badges:
  • Bronze, 100 points or more

This document shows which versions of Cisco VPN Clients, VPN Concentrators, Cisco IOS? Software, and the PIX Firewall support IPsec/Point-to-Point Tunneling Protocol (PPTP).

Microsoft Windows 9.x, ME, SE, XP, NT 4.0, 2000, and XP


Solaris 2.6


Linux 2.2.12 and 2.2.14


http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080094e6d.shtml

ajagadee Mon, 11/26/2007 - 19:11
User Badges:
  • Cisco Employee,

Have you looked at the debugs. If possible, post your configuration along with debug cry is and deb cry ipsec from the pix.


Regards,

Arul


Actions

This Discussion