VPN Site-to-site with PIX 501 and Linogate Defendo

derfeneberg · ‎11-20-2007

Hello,

I have to connect a PIX 501 with a Linogate Defendo (Linux Firewall) using VPN IPSec.

It doesn't really work i don't no why.

The pix has much more preferences which can be changed.

Many preferences of the Linogate Defendo are not visable and there's also no detailed Documentation of this Friewall.

Are there some generall preferences which must be changed by connecting to such a Linux-based Firewall?

It is very hard to get Information from Linogate itself, so i hope somebody here can help!

Thanks

vkapoor5 · ‎11-26-2007

This document shows which versions of Cisco VPN Clients, VPN Concentrators, Cisco IOS? Software, and the PIX Firewall support IPsec/Point-to-Point Tunneling Protocol (PPTP).

Microsoft Windows 9.x, ME, SE, XP, NT 4.0, 2000, and XP

Solaris 2.6

Linux 2.2.12 and 2.2.14

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080094e6d.shtml

ajagadee · ‎11-26-2007

Have you looked at the debugs. If possible, post your configuration along with debug cry is and deb cry ipsec from the pix.

Regards,

Arul