11-20-2007 11:35 PM - edited 03-11-2019 04:33 AM
Hello,
I have to connect a PIX 501 with a Linogate Defendo (Linux Firewall) using VPN IPSec.
It doesn't really work i don't no why.
The pix has much more preferences which can be changed.
Many preferences of the Linogate Defendo are not visable and there's also no detailed Documentation of this Friewall.
Are there some generall preferences which must be changed by connecting to such a Linux-based Firewall?
It is very hard to get Information from Linogate itself, so i hope somebody here can help!
Thanks
11-26-2007 03:23 PM
This document shows which versions of Cisco VPN Clients, VPN Concentrators, Cisco IOS? Software, and the PIX Firewall support IPsec/Point-to-Point Tunneling Protocol (PPTP).
Microsoft Windows 9.x, ME, SE, XP, NT 4.0, 2000, and XP
Solaris 2.6
Linux 2.2.12 and 2.2.14
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080094e6d.shtml
11-26-2007 07:11 PM
Have you looked at the debugs. If possible, post your configuration along with debug cry is and deb cry ipsec from the pix.
Regards,
Arul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide