11-21-2007 02:54 AM - edited 03-15-2019 07:21 AM
Has anyone been able to get VeriFone (credit card machine)on VG224+CME?, do I need any special configuration?
01-14-2008 01:11 PM
Did you ever get an answer. I am running a Verifone Tranz 330 terminals on ATA. I am having intermittent problems. We have moved some of our terminals to dedicated POTS lines.
01-14-2008 01:17 PM
Hi,
first to note, fax/modem/whatever but human voice, connected to anything but FXS ports on the same router with POTS connections, is likely to give trouble.
Of course it is possible that your CC machine is so remote that the arrangement above is not possible.
This said, you should at the minimum specify which image type and version you have on the ATA, and if you have configured according to the guidelines for fax. The recommended image to do that, is H.323.
01-15-2008 07:10 AM
ATA030203SCCP051201A is the version.
01-15-2008 07:40 AM
That is SCCP, as you are doing modem, H.323 is the recommended image.
You can try that, however cisco states the ATA does not supports modem at all:
01-15-2008 10:16 AM
Hi,
valuable info..
My case is
i want to connect POS machine to one of the VG port is is possible m running MGCP for vg.
01-15-2008 12:36 PM
I agree that it should not be used for modems. We are running these machines at about 20 locations. It works intermittently. Luckily, the machines are only used four or five times a month.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide