Wrong internal caller-id on h.323

Unanswered Question

I have two locations, Corporate and Branch, at corporate I am running CCM 4.2 and I have extensions from 100-699 and at branch I am running Call Manager Express and using 200-299.

I have an h.323 gateway setup on the CM to the CME router with a route pattern of 7.2XX with PreDot stripped.

On the CME I have a dial peer with a destination pattern of 7... with a outgoing translation rule to remove the 7

Extension to extension calling and caller-id are working ok, except when a user from Branch calls someone at Corporate with a 2XX extension, in this case the callers phone connects to the corporate extension but shows the branch users extension.

Example: John at Corporate is 201, Mary at Branch is 201. Jim at branch calls 7201 to reach John and the call connects but Jim's phone shows that he is connected to Mary (201).

is there a supplementary service or command I forgot?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion