SRST Licensing

Answered Question
Nov 21st, 2007
User Badges:

Are analog phones counted as phones from an SRST perspective? The analog phones will be behind a 2851 (off VG224's). The VG224's will be setup with MGCP and failover to h.323 (with a dial-peer 9.T) pointing to the SRST router (2851). My scenario will have 70 ip phones or so. The hope is I don't have to go up to the 3800 series in order to get all the analog phones licensed for SRST.


thanks

Correct Answer by Rob Huffman about 9 years 8 months ago

Hi Jerry,


You won't love this info, but I'm sure it applies to the VG224 as well :(


During Cisco CallManager fallback, Cisco SRST considers the Cisco VG248 to be a group of Cisco IP phones. Each of the 48 ports on the Cisco VG248 is treated by Cisco SRST as a separate Cisco IP phone.


http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/products_configuration_guide_chapter09186a0080181320.html#wp1375417


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Rob Huffman Wed, 11/21/2007 - 08:56
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Jerry,


You won't love this info, but I'm sure it applies to the VG224 as well :(


During Cisco CallManager fallback, Cisco SRST considers the Cisco VG248 to be a group of Cisco IP phones. Each of the 48 ports on the Cisco VG248 is treated by Cisco SRST as a separate Cisco IP phone.


http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/products_configuration_guide_chapter09186a0080181320.html#wp1375417


Hope this helps!

Rob

MehmetKaya Thu, 07/26/2012 - 01:31
User Badges:

Hi,


The link was deleted. So I need an official link. Can you send a new link please.

Actions

This Discussion