11-21-2007 09:54 AM - edited 03-10-2019 03:31 PM
Hi
I'm hoping I've missed something basic here. I have an ASA5520 (V7.0(7)) I have enabled (I think) enable authentication with the following command:
aaa authentication enable console tacacs LOCAL
I can authentication to CLI ok with my ACS username/password but when I go to privilege exec mode using enable command I am prompted for a password rather that username/password. No matter what I enter I get access denied. I can login using the login command and authenticate via the local database so I am not locked out but I was wondering what I am doing wrong. Probably something simple but any help would be appreciated - Thanks
11-24-2007 05:51 AM
It seems that on acs you have not selected enable password.
ACS--->User setup---->Tacacs+ enable password. Use any option as per your need.
And try to login now.
Regards,
~JG
11-25-2007 10:21 PM
Hi
Thanks for your reply. I have already set the enable password option is ACS.
Regards
Dave
02-19-2008 05:25 AM
Does this have to be set on a per user basis or can it be set in the group settings?
02-19-2008 06:05 AM
On user basis as this option is not there in group settings.
Regards,
~JG
Do rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide