I have a newly installed LMS 3.0 with the latest updates and running on Windows 2003 Server.
There are two test devices set up that are being managed by IPM, RME, Campus, and DFM.
DFM is only getting config management traps from the devices though. If I unplug the router or the switch so that they are unreachable by LMS, or even if I pop out modules, etc. DFM does not indicate that anything is wrong -- even after waiting an hour.
What do I need to do to get things going ?
P.S. Also, when I'm logged in as Admin and go under DFM's polling and thresholds, none of the polling parameters are accessable. It says "This operation cannot be performed on this group" if you try to change or even look at All Devices, Device Groups, or User Defined groups.
Spent the entire day working with the Cisco TAC and the dude finally concluded that everything looked good to him, but he didn't know what the problem was, and would contact the developer.
Please help if you've encountered any of this before or know what to do. Thanks.