wr mem - privilege Level issue - Pix Firewall

Unanswered Question

Hi,

I have setup specific user level privileges for our Juniors to add and modify acl lists. I would like them also to issue the wr mem command from there level of access. But when l test this command under there level l get the following error :

acmi# wr mem

Building configuration...

Error executing command

[FAILED]

It maybe due to the fact that this level of access is denying them access to the flash or something to do with the cryptochecksum.

Here below are the current privilege levels l have setup.

privilege cmd level 2 mode exec command configure

privilege cmd level 2 mode exec command disable

privilege cmd level 2 mode exec command write

privilege show level 2 mode exec command access-list

privilege cmd level 2 mode configure command name

privilege cmd level 2 mode configure command access-list

It is a Pix 525UR with Version 7.2(2)

Thanks Simon Galloway

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
htarra Tue, 11/27/2007 - 14:46

Privilege-level command tracing is provided through the PIX Firewall syslog, and privilege configuration updates are displayed in the show version command output. User authentication may occur either locally or through a TACACS+ server. This error is occurning because cryptochecksum is mismatching.

Actions

This Discussion