Module question and sup720 and etherchannel

Unanswered Question
Nov 22nd, 2007

I would like to upgrade a catlyst6506 with a sup720-3B, I know that i need the highspeed fan and power supply's of minimum 2500W, I want to be sure that I can configure like this :

1/ I want to reuse the following module (WS-X6516A-GBIC) see next sh mod:

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

2 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL0808UJMD

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

2 000f.241a.bd10 to 000f.241a.bd1f 3.0 7.2(1) 8.2(0.58)TFW Ok

Mod Online Diag Status

--- -------------------

2 Pass

2/ Can I make an etherchannel between this card and a WS-X6148A-GE-45AF to a catalyst 4506 module "WS-X4548-GB-RJ45"

Thanks,

Peter

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
pbogaerts Tue, 11/27/2007 - 02:15

Thanks Jon,

Do I have 2Gb/s full duplex (4GB/s) with this configuration ?

Actions

This Discussion