Discovering Devices beyond firewall on CiscoWorks

Unanswered Question
Nov 23rd, 2007
User Badges:

I have deployed Ciscoworks and can collect all LAN devices up to the firewall. what configurations do i need to make so as to collect WAN device information?

Tahnk you for your time and Assistance,

Genet

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Sat, 11/24/2007 - 11:52
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Campus Manager Discovery requires CDP, ILMI, or ELMI to be enabled for it to automatically find devices. Since none of our firewall products support those technologies, Discovery will not find devices behind them.


As a workaround, you will need to add multiple seed devices: one on the inside of the firewall, and one on the outside. While the network will appear disjoint where the firewall is, you will find all other devices on both sides.

itssnsu07 Mon, 11/26/2007 - 04:28
User Badges:

Thank You very much for your time and assistance. What about Nokia Firewall, it also doesn't support those technologies?


Thank you again and Kind Regards,

Genet.

Joe Clarke Mon, 11/26/2007 - 09:14
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The same thing is true for any non-Cisco routing device.

Actions

This Discussion