11-23-2007 12:30 AM
I have deployed Ciscoworks and can collect all LAN devices up to the firewall. what configurations do i need to make so as to collect WAN device information?
Tahnk you for your time and Assistance,
Genet
11-24-2007 11:52 AM
Campus Manager Discovery requires CDP, ILMI, or ELMI to be enabled for it to automatically find devices. Since none of our firewall products support those technologies, Discovery will not find devices behind them.
As a workaround, you will need to add multiple seed devices: one on the inside of the firewall, and one on the outside. While the network will appear disjoint where the firewall is, you will find all other devices on both sides.
11-26-2007 04:28 AM
Thank You very much for your time and assistance. What about Nokia Firewall, it also doesn't support those technologies?
Thank you again and Kind Regards,
Genet.
11-26-2007 09:14 AM
The same thing is true for any non-Cisco routing device.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide