Hi
I have configured my cme router for aa using the tcl script.When i dial the pilot number it just gives me a ring and then fast busy signal.I am actually playing around on my virtual router without any dsps.I am not able to hear the music on hold au file also which i have configured so does this require any dsps for operation?The configs are as below.
application
service queue flash:app-b-acd-2.1.0.0.tcl
param queue-len 15
param aa-hunt3 5021
param queue-manager-debugs 1
param aa-hunt2 5020
param number-of-hunt-grps 2
!
service aa flash:app-b-acd-aa-2.1.0.0.tcl
param operator 5002
param number-of-hunt-grps 2
paramspace english index 1
param call-retry-timer 15
paramspace english location flash:
param second-greeting-time 60
param dial-by-extension-option 1
param handoff-string aa
param welcome-prompt _bacd_welcome.au
param aa-pilot 5015
param service-name queue
!
!
dial-peer voice 10 voip
service aa
destination-pattern 5015
Flash configs
HQ#sh flash:
System CompactFlash directory:
File Length Name/status
1 496521 music-on-hold.au
2 18346 app-b-acd-2.1.0.0.ReadMe
3 24679 app-b-acd-2.1.0.0.tcl
4 33870 app-b-acd-aa-2.1.0.0.tcl
5 75650 en_bacd_allagentsbusy.au
6 83291 en_bacd_disconnect.au
7 63055 en_bacd_enter_dest.au
8 37952 en_bacd_invalidoption.au
9 496521 en_bacd_music_on_hold.au
10 123446 en_bacd_options_menu.au
11 42978 en_bacd_welcome.au
12 129476 flash/P0030702T023.bin
13 459 flash/P0030702T023.loads
14 685334 flash/P0030702T023.sb2
15 129880 flash/P0030702T023.sbn
[2442440 bytes used, 14334772 available, 16777212 total]
16384K bytes of ATA System CompactFlash (Read/Write)
The phones from which i am dialling are the phones configured on the cme router.Calls between the phones are happening fine.
Thanks in advance
