11-24-2007 07:29 AM - edited 03-15-2019 07:24 AM
Hi everyone and really hope for your advices)
I have the following configuration:
GW(1760)---2620--(FrameRelay)--7304--|PIX|--6509--(local voice stuff)
11-24-2007 01:53 PM
11-24-2007 02:50 PM
Sorry, was diverted and then had forgotten about post on forum.So to the problem:
I have the following configuration:
GW(1760)---2620--(FrameRelay)--7304--3640--|PIX|--6509--(local voice stuff).
As voice stuff i have as5350,CM and phones.
1760 & 2620 are situated in the remote offices and 1760 has FXS ports. The problem is that I can't make a call from this office.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
we had several similar remote offices with 1760 and from this device command "csim start *my number* is working".The output of sh call hi vo br and sh call hi vo last 1 on working 1760 is:
1260 : 308242970ms.77 +-1 +21230 pid:100 Originate 3733
dur 00:00:00 tx:0/0 rx:1004/20080 0 ()
IP 172.18.0.3:16800 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8
and
...
RemoteIPAddress=172.17.21.2
RemoteUDPPort=16800
RemoteSignallingIPAddress=172.17.21.2
RemoteSignallingPort=1720
RemoteMediaIPAddress=172.18.0.3
RemoteMediaPort=16800
...
while the same commands on the not working 1760 is:
0 : 79 74616091hs.79 +-1 +2002 pid:100 Originate 3733
dur 00:00:00 tx:0/0 rx:0/0 0 ()
IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
and
RemoteIPAddress=172.17.21.3
RemoteUDPPort=0
RemoteSignallingIPAddress=172.17.21.3
RemoteSignallingPort=1720
RemoteMediaIPAddress=0.0.0.0
RemoteMediaPort=0
.
*172.17.21.3 - it's CM
172.18.0.3 - it's AS (which is actually calling to *my number*)
11-24-2007 02:59 PM
also here is the debug of h225 asn1 and h225 events on non-working 1760:
Nov 25 00:31:37.630 EET: Changing to new event: CONNECT
h323chan_chn_connect: connecting to 172.17.21.2:1720
Nov 25 00:31:37.630 EET: h323chan_gw_conn: Created socket fd=3
Nov 25 00:31:37.630 EET: h323chan_gw_conn: connect in progress on fd=3h323chan_chn_connect: using fd=3, owner_data(ccb) 0x84315674
changing from NONE state to CONNECTING state
Nov 25 00:31:37.674 EET: h323chan_chn_process_read_socket: fd=3 of type CONNECT_PENDING has data
Nov 25 00:31:37.674 EET: Changing to new event: CONNECTED
changing from CONNECTING state to CONNECTED state
Nov 25 00:31:37.678 EET: compose_TunnelledSignallingMessage_ciscoNo tunnelled content.
Nov 25 00:31:37.678 EET: H225.0 OUTGOING PDU ::=
value H323_UserInformation ::=
{
h323-uu-pdu
{
h323-message-body setup :
{
protocolIdentifier { 0 0 8 2250 0 4 }
sourceAddress
{
h323-ID : {"luck"}
}
sourceInfo
{
vendor
{
vendor
{
t35CountryCode 181
t35Extension 0
manufacturerCode 18
}
}
gateway
{
protocol
{
voice :
{
supportedPrefixes
{
}
}, h323 :
{
supportedPrefixes
{
}
}
}
}
mc FALSE
undefinedNode FALSE
}
activeMC FALSE
conferenceID '00000000000000000000000000000000'H
conferenceGoal create : NULL
callType pointToPoint : NULL
sourceCallSignalAddress ipAddress :
{
ip 'C0A8C710'H
port 11989
}
callIdentifier
{
guid '00000000000000000000000000000000'H
}
fastStart
{
'00...100'H,
'400...C710...'H,
'00...100'H,
'400...8C7...'H
}
mediaWaitForConnect FALSE
canOverlapSend FALSE
multipleCalls TRUE
maintainConnection TRUE
symmetricOperationRequired NULL
}
h245Tunneling TRUE
}
}
Nov 25 00:31:37.702 EET: H225.0 OUTGOING ENCODE BUFFER::= 20...00180
Nov 25 00:31:37.706 EET:
Hex representation of the SETUP TPKT to send.: 080...180
h225SetupRequest: Q.931 SETUP sent from fd=3
Nov 25 00:31:37.710 EET: h323chan_chn_process_read_socket: fd=3 of type CONNECTED has data
Nov 25 00:31:37.710 EET: h323chan_recvdata: No Data on fd=3
PROCESS_READ: FAILED/NOT COMPLETE,rc 10, fd=3
ter
Nov 25 00:31:52.688 EET: compose_TunnelledSignallingMessage_ciscoNo tunnelled content.
Nov 25 00:31:52.688 EET: H225.0 OUTGOING PDU ::=
value H323_UserInformation ::=
{
h323-uu-pdu
{
h323-message-body releaseComplete :
{
protocolIdentifier { 0 0 8 2250 0 4 }
callIdentifier
{
guid '00000000000000000000000000000000'H
}
}
h245Tunneling TRUE
}
}
Nov 25 00:31:52.692 EET: H225.0 OUTGOING ENCODE BUFFER::= 258...180
Nov 25 00:31:52.692 EET:
Hex representation of the RELEASE COMPLETE TPKT to send.: 080...0180
h225TerminateRequest: Q.931 RELEASE COMPLETE sent from fd=3. Call state changed to [Null].
Nov 25 00:31:52.696 EET: h323chan_close: TCP connection from fd=3 closed
===
What i've checked:
1 access-lists
2 NAT rules
I'm not sure in FrameRelay
Ss it a problem with the udp ports range 16384-32768? (signaling is OK)
sorry for a such chaotic post(writing at night) but will provide any details to help solving this problem
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: