dot1x authentication failed

Unanswered Question
Nov 24th, 2007

I have a 3550 switch with IOS 12.2.I have configured a single port fa/26 to authenticate via my radius server .for my switch when i give a test it works fine.

'osi_switch#test aaa group radius server deepa 01deepa01 legacy

Attempting authentication test to server-group radius using radius

User was successfully authenticated.'

But my system is not getting authenticated using the same login.below is my switch configuration

On the pc i have enabled md5 authentication on lan connection properties.

Any help will be highly appreciated.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
amritpatek Thu, 11/29/2007 - 14:41

If the switch passes the authentication test this means that config in switch is fine. Try using a different PC on the same interface and check if this work fine.


This Discussion