11-24-2007 10:10 PM - edited 03-11-2019 04:34 AM
device: asa 5520
how can i verify whether my nat is realy taking place aside from the sh xlate;
static (dmz2,outside) IPoutside IPdmz2
11-24-2007 10:21 PM
you can do
show local-host IPdmz2
or
show xlate | inc IPoutside
beside these commands if your nat config is correct connection is another way to determined it is woring.
Rate any helpful post !
HTH
Jorge
11-24-2007 10:44 PM
but both of this shows translation is there even though theres no actual traffic taking place.
i wanted to know whether translation is realy taking place
11-24-2007 10:47 PM
even though you do a clear xlate, and you do a sho xlate, it will still sh you the translation
11-24-2007 11:12 PM
that means either the local host is receiving traffic from outside or generating-requesting outbound traffic by some app in host.. issue in pix enable mode PIX#clear local-host IPdmz , then do show xlate see if it still has translations.
Pls rate any helpful post
Jorge
11-25-2007 08:53 PM
the 'show conn' command might help you on this also.
11-26-2007 07:25 AM
try "sh nat" and see if that helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide