Thanks for the fast reply :-)

I have a

tftp-server flash:dk/dk-td-sccp.jar alias Danish_Denmark/td-sccp.jar

And

user-locale DK

user-locale 1 DK

user-locale 2 DK

user-locale 3 DK

user-locale 4 DK

network-locale DK

network-locale 1 DK

network-locale 2 DK

network-locale 3 DK

network-locale 4 DK

in the config, and have tried "debug tftp events"

The phone dosent even ask for the file.

Phone firmware is SCCP70.8-2-2SR2S

IOS c2801-ipvoicek9-mz.124-11.XW2.bin

Ok, can you upgrade phone FW to 8.2(2)SR4S and IOS to XW4 ? That should fix the time problem.

Then you have to look again into which files the phone is requesting, if nothing comes out for the Danish locale, you might need to work on this as a possible bug with the TAC.

XW4 is not available for the 2801 that i am running on.

I will try 8.2(2)SR4S for the phones.

tomorrow :-)

Thanks for the fast reply

True, apparently XW2 is the latest you can use for CME 4.2.

But, if you don't need new features in 4.2, suggest you try 12.4(11)XJ4 (CME 4.1) that is stable, except for a memory leak that manifest itself only under certain conditions (and may exist as well in XW).

Good luck!

Just tried SCCP70.8-2-2SR4S on the phones.

No change, it dosent try to read the locale file.

Is 8-3-3SR2S a possible solution or do i have to go back on 12.4(11)XJ4 and CME4.1 tomorrow.

Looks like CME4.2 is still to "wet" to use.

Thanks

Peter, I've tried "user-locale DK" on one of my XJ4 equipped systems, it correctly requests the locale, of course I didn't verified the accuracy of translations :)

Nov 25 17:59:24.069 CET: TFTP: Looking for SEP000F8F28DAD4.cnf.xml

Nov 25 17:59:27.733 CET: TFTP: Opened system:/its/XMLDefault7970.cnf.xml, fd 1, size 1069 for process 199

Nov 25 17:59:27.737 CET: TFTP: Finished system:/its/XMLDefault7970.cnf.xml, time 00:00:00 for process 199

Nov 25 17:59:28.645 CET: TFTP: Looking for Danish_Denmark/td-sccp.jar

If that doesn't work for you, please try the reset sequence on the phone, press # while powering on, release when line button flash in a pattern, then press 12345678*0#, that will force a complete reset. Make sure you have term70.defaults.loads in flash and tftp config.

No need for FW 8.3.x, as far as I know it still has many bugs :(

Tried complete reset.

Tried 8-3-3-SR2, gave me the new logo and some old bugs :-(

Impressive lack off testing !!

Indeed. Try this: set a different locale, reset the phone. Set DK again, reset.

At some point the request must be produced just like the 7970 I tried.

Tried that, no result.

Tried the same with a 7941, changing to DE and back to KK, no problems.

Tried a total reset of a 7941.

Comes up with the requested locale every time.

Seems like a problem with 7970/71.

I have a 2811, could try with XW3 on that.

Guess that the phone will keep the locale once loaded.

Thanks so far

Just switched to an 2811 where XJ3 is available. Solved both problems :-)

Strange that XJ3 or XJ4 is not available for 2801 ???

I have 3 x 2801 that are to be delivered this week. The locale problem can be solved via the 2811, but the clock is still 1 hour behind :-(