Translation pattern understanding

a.gooding · ‎11-25-2007

Guys,

im doing something wrong and just needed some clarifiaciton.

i have some DID numbers im translation on an h323 gateway. this is the scenario

ISP providing a range of DID numbers 821-59XX. im translating the 59XX to 29XX. the details are as follows

/82159+/ /29/

This works fine for numbers 2900 to 2989 meaning i havethe DID numbers works for all these. but from 2990 - 29999 the translation does not work. if i test voice-translation rule <tag> 8215999 it translates to 29.

any recommendations would be greatly appreciated.

dezoconnor · ‎11-25-2007

Try changing your rule to:

/^82159/ /29/

HTH

allan.thomas · ‎11-25-2007

I have tested both translations, and either of the two translations below successfully translates the number that you require.

/^82159/ /29/

or

/82159/ /29/

Regards

Allan.

a.gooding · ‎11-26-2007

so whats the latest recommendation though?

again id like to translate 82159XX to 29XX.

therefore 8215900 translates to 2900 down the line until 8215999 to 2999.

again. i have 2900 to 2989 working properly with /82159+/ /29/

thanks again

Rob Huffman · ‎11-25-2007

Hi Darren and Allan,

Love to see people lab things up to test out scenarios for others. 5 points for both of you for your time and effort!

Thanks again,

Rob

dezoconnor · ‎11-25-2007

Hi Rob, that was a bit out of the blue. Thanks. I enjoy spending a bit of time on here just to see if I can pick tips up or help others out. Regards. Darren