11-26-2007 12:00 AM - edited 03-11-2019 04:35 AM
hello all,
i am kindly ask you for your help in a strange situation. attached you will find a layout of my network.
all networks before R2 include the interface of this router on 10.10.10.0 network is pinging with Server X.
the host on Lan 192.168.239.0/24 does not ping.
what i want to do is to access this server from all networks without a static nat on inside network.
thank you!
11-26-2007 12:17 AM
Hi
Does the pix have a route back to the 192.168.239.0/4 netwrok via R1.
Could you send a copy of the pix config plus a "sh ip route" from both R1 and R2.
Jon
11-26-2007 12:43 AM
yes,
route inside-net 192.168.239.0 255.255.255.0 192.168.40.20 1
also from host on 192.168.239.0 i can ping ip address of inside interface.
i will send also the config.
thank you
11-26-2007 01:46 AM
thank you Jon , i found it.
it was a ACL on R2 :)
thanks
11-26-2007 01:55 AM
No problem. Glad you found the solution and thanks for letting me know.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: