11-26-2007 03:17 AM
Hi,
How can i configure on the 4506 a trunk mode for 2, 3 ports, cause i want to make a link agragation between two switches, on the other one which is a dell i already configure two statics ports for the agragation.
Thank you.
Joey
11-27-2007 08:14 PM
Hi, you can configure trunking on one or morw switchport, by default they carry traffic for all vlans. use etherchannel or port channel to group the port together for load balance and combined bandwidth. Have a look at the documents below.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.1/12ew/configuration/guide/layer2.html
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.1/configuration/guide/channel.html
11-29-2007 02:04 AM
Thank you, i'll take a look.
Have a good day.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide