6509 IOS upgrade

Unanswered Question
Nov 26th, 2007

Dears

i have 6509 switch and i want the switch to boot from IOS image in Disk1 instead of the image in bootflash can anyone give me steps to do this task

Thanks,

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
f-cagica Mon, 11/26/2007 - 05:54

Hi,

from your post i assume you are running IOS and not CATos.

Did you try:

boot system disk1: and reload?

seegomaa Mon, 11/26/2007 - 06:17

Hi

thanks for reply

i tried this command and there is conflict in my readings because some documents i found the command boot system flash disk1:

and sometimes boot system disk1: and sometimes boot system flash sup-disk1:

i don't what is the right command

thanks

jarredtaylor Mon, 11/26/2007 - 06:41

I always use the 'boot system flash ' command to specify the boot image. The 'flash' keyword instructs the device to boot from an image stored in a flash memory device (whether that's bootflash:, sup-bootflash:, disk1:, etc.).

HTH,

Jarred

f-cagica Mon, 11/26/2007 - 07:29

Hi,

boot system disk1:... will work as well. Either will achieve your goal.

Actions

This Discussion