11-26-2007 05:36 AM - edited 03-05-2019 07:37 PM
Dears
i have 6509 switch and i want the switch to boot from IOS image in Disk1 instead of the image in bootflash can anyone give me steps to do this task
Thanks,
11-26-2007 05:54 AM
Hi,
from your post i assume you are running IOS and not CATos.
Did you try:
boot system disk1:
11-26-2007 06:17 AM
Hi
thanks for reply
i tried this command and there is conflict in my readings because some documents i found the command boot system flash disk1:
and sometimes boot system disk1: and sometimes boot system flash sup-disk1:
i don't what is the right command
thanks
11-26-2007 06:41 AM
I always use the 'boot system flash
HTH,
Jarred
11-26-2007 07:29 AM
Hi,
boot system disk1:... will work as well. Either will achieve your goal.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide