I have a 3845. In slot 1 and 2, I have a Voice VM-8FXS/DID Port adapter with two NT or TE BRI Voice Expansion Module (4 port). 2 E1 (2 port) Multi-Flex Trunk WAN daughter card in slot 0 are used to connect to the PSTN.
I was able to enter the following commands:
network-clock-participate slot 1
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 E1 0/0/0
network-clock-select 2 E1 0/0/1
But this one doesn't work:
# network-clock-participate slot 2
Slot is empty or does not support clock participate
Any ideas ?
The hardware of slot 1 is the same than