DHCP Snooping and Etherchannel config

Unanswered Question
Nov 28th, 2007
User Badges:

Hello, I have a 2960 where I have gi0/1 and gi 0/2 boundled on a Channel po1. I enabled "ip dhcp snooping trust" on po1. What is trsange is that on gi0/1 and gi0/2 the command doesn't appear. What is right:

1) The command should'n appear cause is enabled only on logical interfaces PO1

2) command has to be placed manually also on gi0/1 ans gi0/2



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Edison Ortiz Sun, 12/02/2007 - 16:31
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Commands placed under interface port-channel1 won't appear on its respective physical interfaces but commands applied to its respective physical interfaces will appear in the interface port-channel1.


This Discussion