11-28-2007 03:56 AM - edited 03-03-2019 07:42 PM
from the result below, what i am loosing?. what is the remedy for this?.
Depot-rtr# show buffers
Buffer elements:
1118 in free list (500 max allowed)
20206063 hits, 0 misses, 1119 created
Public buffer pools:
Small buffers, 104 bytes (total 50, permanent 50, peak 134 @ 7w0d):
49 in free list (20 min, 150 max allowed)
9523187 hits, 13315 misses, 2986 trims, 2986 created
10584 failures (0 no memory)
Middle buffers, 600 bytes (total 25, permanent 25, peak 59 @ 3d04h):
23 in free list (10 min, 150 max allowed)
966089 hits, 7237 misses, 1321 trims, 1321 created
6168 failures (0 no memory)
Big buffers, 1536 bytes (total 50, permanent 50, peak 62 @ 7w0d):
49 in free list (5 min, 150 max allowed)
4178146 hits, 1636 misses, 460 trims, 460 created
1330 failures (0 no memory)
VeryBig buffers, 4520 bytes (total 10, permanent 10, peak 12 @ 7w0d):
10 in free list (0 min, 100 max allowed)
495 hits, 835 misses, 39 trims, 39 created
835 failures (0 no memory)
Large buffers, 5024 bytes (total 1, permanent 0, peak 3 @ 7w0d):
1 in free list (0 min, 10 max allowed)
40 hits, 795 misses, 625 trims, 626 created
795 failures (0 no memory)
Huge buffers, 18024 bytes (total 1, permanent 0, peak 3 @ 1w3d):
1 in free list (0 min, 4 max allowed)
39 hits, 756 misses, 624 trims, 625 created
756 failures (0 no memory)
Header pools:
Header buffers, 0 bytes (total 768, permanent 768):
256 in free list (128 min, 1024 max allowed)
512 hits, 0 misses, 0 trims, 0 created
0 failures (0 no memory)
512 max cache size, 512 in cache
2664492 hits in cache, 0 misses in cache
Particle Clones:
1024 clones, 0 hits, 0 misses
Public particle pools:
F/S buffers, 256 bytes (total 768, permanent 768):
256 in free list (128 min, 1024 max allowed)
512 hits, 0 misses, 0 trims, 0 created
0 failures (0 no memory)
512 max cache size, 512 in cache
0 hits in cache, 0 misses in cache
Normal buffers, 1548 bytes (total 768, permanent 768):
768 in free list (128 min, 1024 max allowed)
0 hits, 0 misses, 0 trims, 0 created
0 failures (0 no memory)
Private particle pools:
Serial0/0/0 buffers, 1536 bytes (total 64, permanent 64):
0 in free list (0 min, 64 max allowed)
64 hits, 0 fallbacks
64 max cache size, 32 in cache
55040656 hits in cache, 0 misses in cache
FastEthernet0/0 buffers, 1552 bytes (total 512, permanent 512):
0 in free list (0 min, 512 max allowed)
512 hits, 0 fallbacks
512 max cache size, 256 in cache
47477465 hits in cache, 0 misses in cache
FastEthernet0/1 buffers, 1552 bytes (total 512, permanent 512):
0 in free list (0 min, 512 max allowed)
512 hits, 0 fallbacks
512 max cache size, 256 in cache
256 hits in cache, 0 misses in cache
11-28-2007 04:30 AM
Check this link to interpret your show buffers output.
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a7b80.shtml
pls rate any helpful post if it helps!
HTH
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide