Call Manager Simulator No Longer Connecting after firmware upgrade

Unanswered Question
Nov 28th, 2007
User Badges:

I upgraded the firmware for a previously working test system that was simply a call manager simulator and a phone (CiscoIPPS_SDK_v3[1].3.4 was used to install).


It looks like that worked, but now I get a "Unprovisioned" message on the phone.


I notice that some (most) of the set up options that previously were working on the phone are now locked into somewhere else.


Can someone please suggest what I need to create a simple test system using the simulator and a phone? The elements (i.e. didn't need a separate tftp server before, set in phone to "alternate" and point at computer with call manager simulator), the files, and any changes I need to make to them.


This is becoming a lingering malfeasance on my life, and any help gratefully appreciated.


Keith


Here's the info from the phone, which shows up on the network:

MAC Address 00146A9C3EE0

Host Name SEP00146A9C3EE0

Phone DN

App Load ID jar70sip.8-3-2SR1.sbn

Boot Load ID 7970_64060118.bin

Version term70.default

Expansion Module 1

Expansion Module 2

Hardware Revision 1.1

Serial Number INM09241B6Z

Model Number CP-7970G

Message Waiting No

UDI phone

Cisco IP Phone 7970G, Global

CP-7970G

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
msabir Sun, 12/09/2007 - 19:43
User Badges:
  • Bronze, 100 points or more

Cisco has not released any updated on CCM simulator in a while, and I have given up on it. I use CCM on a virtual image with IP communicator and it works like a champ. You just need 2GB RAM to make both run on same box.

Actions

This Discussion