I'm trying to upgrade the IOS of a 2800 router.
I followed the steps described here:
but my problem is that when I ask to copy the new file, I can't erase the flash, so there is no enough space to copy the file.
Here is the output:
uem#copy tftp: flash:
Address or name of remote host ? 172.20.0.2
Source filename ? c2800nm-adventerprisek9-mz.124-17a.bin
Destination filename [c2800nm-adventerprisek9-mz.124-17a.bin]?
Loading c2800nm-adventerprisek9-mz.124-17a.bin from 172.20.0.2 (via FastEthernet0/0): !
%Error copying tftp://172.20.0.2/c2800nm-adventerprisek9-mz.124-17a.bin (Not enough space on device)
The new file size is 40205052
Thanks in advance