11-29-2007 09:57 AM - edited 03-05-2019 07:43 PM
Hello!
i have seen this Config for IPv6:
frame-relay map ipv6 2001:CC5E:4321:ABCD::10/64 110
frame-relay map ipv6 FE80::CCE3:1FFF:FEB7:0 110
THE QUESTION:What is this:FE80::CCE3:1FFF:FEB7:0?how can i find it?
10xs
11-29-2007 10:17 AM
The link-local address (FE80::) is needed there to transport dynamic routing information (OSPFv3 and RIPng) over the frame-relay.
You can find it by typing show ipv6 int brief
11-29-2007 10:23 AM
hello freind
EdisonOrtiz:do i need it in my Config?i mean the map statments?
******************************************
2)The requirments says R10 Lo0 sould be part of the EIGRP 100.Can r10 have this interface into EIGRP 100 AND OSPF AREA 0?
ON R10 i have redistribution between ospf 1 and eigrp 100
**************************************
can i redistribut to ospf 1 2 eigrp as
like eigrp 100 and eigrp 150
10xs a lot
10XS
11-29-2007 10:30 AM
I'm sorry - I'm confused.
Your first query was regarding IPv6 and the second query is regarding IPv4 dynamic routing protocols.
I believe the answer is, whatever you have in the frame-relay ipv6 statement, it won't affect your IPv4 routing protocols.
You need IPv4 frame map statements as well.
__________________________________________
As for this question:
"The requirments says R10 Lo0 sould be part of the EIGRP 100.Can r10 have this interface into EIGRP 100 AND OSPF AREA 0?"
You can have an interface participating on 2 dynamic routing protocols but it's not 'best practice' and often discourage. For Lab work, yeah it's cool to play around with it but never should be done in production.
11-29-2007 10:40 AM
man
no need to be confused.10xs a lot...
11-29-2007 10:42 AM
hello
can this work fine:
router ospf 1
redis eigrp 100 metric 1 1 1 1 1
redis eigrp 150 metric 1 1 1 1 1
10xs
11-29-2007 10:47 AM
sorry
i mean these:
router ospf 1
redis eigrp 100 subnets
redis eigrp 150 subnets
10xs
11-29-2007 10:54 AM
Yes, that should work. It's not mandatory to include a metric value when redistributing into OSPF.
11-29-2007 10:52 AM
You are missing the 'subnets' keyword so redistributed routes into OSPF can be classless.
Also, the metric illustrated is for redistribution into EIGRP.
OSPF only uses one metric
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: