Ignored input errors

Unanswered Question
Nov 29th, 2007
User Badges:

Our router is receiving ignored errors on one of its interfaces. I have done a little research and found something on rx-ring limit being the possible cause. Can someone please help me with a command to raise this limit. It is currently set to 64 and the router is a 2851. Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
wochanda Fri, 11/30/2007 - 11:10
User Badges:
  • Silver, 250 points or more

This generally indicates you're oversubscribing your router. Check 'show proc cpu history' and see if you have periods of CPU at 100%. If so, you either want to disable some features (QoS, NAT, Firewall, VPN) or upgrade to a 3800.

mikepinto Fri, 11/30/2007 - 11:19
User Badges:

CPU is fine. Runs at 4% and never peaks above 12%. Is there a way to increase the rx-ring?

mikepinto Mon, 12/10/2007 - 08:19
User Badges:

I worked with TAC and found out that there is a bug in the code and we needed to upgrade so the rx-ring was 128 instead of 64. You can not change it through software.

Actions

This Discussion