11-30-2007 04:38 PM - edited 03-11-2019 04:37 AM
Every few months PIX stops passing outside traffic for HTTPS (443) port for Exchange server OWA ( internally it works just fine). When I look at xlate it shows 0 bytes and flags aB. I change rule to port 4343 and it works. After a few weeks I change back to port 443 and it works. I dont understand why it randomly stops working and then randomly works again. Does anyone had same or similar problem ? Thank you.
12-01-2007 12:36 PM
what happens when you bounce the box? does it work when it comes back up? how about when you clear xlate? what version of PIXOS are you runnig? can you post your pix config?
-brad
(please rate the post!)
12-03-2007 01:33 PM
12-04-2007 12:47 AM
Hi Yevyenig,
As a test, can you take out the following...
access-list outside_access_in permit tcp any host 216.31.255.32 eq https
static (inside,outside) 216.31.255.32 10.1.10.46 netmask 255.255.255.255 0 0
And add...
access-list outside_access_in permit tcp any host 216.31.255.32 eq https
static (inside,outside) tcp 216.31.255.32 https 10.1.10.46 https netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
Also for good mesure, can you take out the other port access i.e. 4343 access.
Please issue - wr m and clear xlate after the modifications.
Let me know how it goes,
Jay
12-04-2007 07:34 AM
Thank you, Jay. I'm going to try it and let you know. yevgeniy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide