Knowing the size of RAM and FLASH

newnetman · ‎12-01-2007

Dear Invisible Mentors,

By looking at the following SH VER from my 2621 series, I'm i correct by saying the router has

64MB of DRAM? and 16MB of flash?. Please correct me if wrong and show me how to recognize the amount of DRAM and FLASH in the future.

Thanks

The show ver

cisco 2621 (MPC860) processor (revision 0x102) with 61440K/4096K bytes of memory

Processor board ID JAD042705K9 (204402121)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

2 FastEthernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

JORGE RODRIGUEZ · ‎12-01-2007

Yes, very closed with DRAM info

This is the flash size ( 16 MB flash )

16384K bytes of processor board System flash (Read/Write)

This is the RAM ( 65 MB RAM)

cisco 2621 (MPC860) processor (revision 0x102) with 61440K/4096K bytes of memory

Rgds

Jorge

Jorge Rodriguez

newnetman · ‎12-01-2007

Hello Jorge,

Thanks a lot for the prompt response. can you please tell me how you arrived at 65MB of RAM? for the flash (its clear to me)

Is there anything like 65MB of RAM?

Thanking you in advance,

Regards

steve.busby · ‎12-02-2007

It's actually 64MB: 61440K + 4096K = 65536K

Then 65536K / 1024 = 64MB