Knowing the size of RAM and FLASH

Unanswered Question
Dec 1st, 2007
User Badges:

I am putting this question across since no response fro "getting started with LAN.

Dear Invisible Mentors,

By looking at the following SH VER from my 2621 series, I'm i correct by saying the router has

64MB of DRAM? and 16MB of flash?. Please correct me if wrong and show me how to recognize the amount of DRAM and FLASH in the future.

Thanks

The show ver

cisco 2621 (MPC860) processor (revision 0x102) with 61440K/4096K bytes of memory

Processor board ID JAD042705K9 (204402121)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

2 FastEthernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion