12-01-2007 02:16 PM - edited 03-05-2019 07:45 PM
I am putting this question across since no response fro "getting started with LAN.
Dear Invisible Mentors,
By looking at the following SH VER from my 2621 series, I'm i correct by saying the router has
64MB of DRAM? and 16MB of flash?. Please correct me if wrong and show me how to recognize the amount of DRAM and FLASH in the future.
Thanks
The show ver
cisco 2621 (MPC860) processor (revision 0x102) with 61440K/4096K bytes of memory
Processor board ID JAD042705K9 (204402121)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
12-01-2007 02:22 PM
You are correct!
Invisible Mentor,
12-01-2007 02:23 PM
Hi, no need to post same question in multiple forums, someone will answer with just one post.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: