12-02-2007 08:24 AM - edited 03-05-2019 07:46 PM
hello experts!
i entered the command EIGRP Stub under the eigrp AS.but i do not find it when i issue sh run?
10xs
12-02-2007 08:50 AM
Do you have a frame-relay connection on this router ?
If so, all spokes must have EIGRP Stub configure with the exception of the hub.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r/rte_eih.htm#wp999335
12-02-2007 08:56 AM
hello freind
12-02-2007 08:59 AM
NO I DONT HAVE FRAME-RELAY
12-02-2007 09:07 AM
Can you post your config along with explanation of your network topology (what kind of connections this router has)?
As noted in the URL I posted, Ethernet connections will also be affected with the EIGRP stub.
12-02-2007 09:41 AM
HI
ETHERNET CONNECTION THE HAVE.
12-02-2007 09:12 AM
Do you mean EIGRP stub router functionality?
http://www.cisco.com/en/US/tech/tk365/technologies_white_paper0900aecd8023df6f.shtml
usage in eigrp
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca762.html#wp1003890
cisco-2621-rtr(config)#router eigrp 1
cisco-2621-rtr(config-router)#eigrp stub
Jorge
12-02-2007 09:42 AM
10XS FOR UR HELP JORGE
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
