12-02-2007 03:36 PM - edited 03-15-2019 07:32 AM
hello,
i have CCME 4.2 and i want to configure the extension mobility.
can you post me the configuration that i can put in the router.
thanks in advance.
12-02-2007 03:54 PM
Link to documentation with examples:
http://cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemobl.html#wpmkr1130585
Hope this helps, please rate post if it does!
12-02-2007 04:30 PM
thanks for reply,
the document is not understandable.
please post me the configuration of EM.
thanks a lot.
12-02-2007 04:40 PM
Hi,
Which part do you not understand? There is a complete configuration example in there, have you tried ?
12-02-2007 05:03 PM
hello,
i don't understand the type of number (silent, beep, ...)
because this think is not present in Cisco Call Manager.
thanks.
12-02-2007 05:16 PM
Here the description for button command that is the equivalent of "type" in EM configuration:
http://cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_b1ht.html#wp1067478
Suggest that you begin configuring with "normal" ring. Then depending on the phone type, and user request, you can do more advanced configurations.
As an appreciation to those providing answers, please rate posts using the scrollbox below!
12-02-2007 05:34 PM
hi
will test it tomorrow, and i will post you the result of the test
thanks for your helping.
12-03-2007 09:59 AM
hi,
i have configure the EM within the CCME, but the problem is when i log into the phone, the number place is empty.
the configuation is : voice logout-profile 1
pin 12345
user badr password badr
number 123 type normal
!
voice user-profile 1
pin 12345
user badr password badr
number 4123 type silent-ring
!
!
!
!
!
!
!
!!
!
!
!
!
ephone 1
mac-address 0019.E8C8.5707
type 7961
logout-profile 1
!
!
!
!
!
!
!
!
!!
help me please.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide