12-03-2007 07:23 AM - edited 03-09-2019 07:31 PM
Hello all,
does anybody knows how i can read the temperature for the asa55xx. i need this for some reasons in critical environments.
regards
Klaus
Solved! Go to Solution.
12-04-2007 06:24 AM
Klaus-
Here's a link that show what MIBS are supported on the ASA's.
http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml
You'll probably have to look through them, but it shouldn't be too hard to find if it's supported.
HTH and please rate.
12-04-2007 06:24 AM
Klaus-
Here's a link that show what MIBS are supported on the ASA's.
http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml
You'll probably have to look through them, but it shouldn't be too hard to find if it's supported.
HTH and please rate.
12-04-2007 06:36 AM
Hello ceclark,
thanks for your help and yes i have found what i need :-)
best regards
Klaus
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: