12-04-2007 02:19 AM
I did the basic configuration for ADSL on router 1802. When I issue show int atm0, it shows the following.
ATM0 is initializing, line protocol is down
Hardware is MPC ATMSAR (with Alcatel ADSL Module)
Even for one full day it shows as initializing only. It does'nt become UP.
Solved! Go to Solution.
12-04-2007 06:17 AM
it seems that you don't have a working dsl line (do you have checked this with another modem) or that you have the false router (Annex B [ADSL over ISDN] instead of Annex A [ISDN over POTS]) ...
Cisco 1801 is for Annex A (POTS)
Cisco 1802 is for Annex B (ISDN)
12-04-2007 06:17 AM
it seems that you don't have a working dsl line (do you have checked this with another modem) or that you have the false router (Annex B [ADSL over ISDN] instead of Annex A [ISDN over POTS]) ...
Cisco 1801 is for Annex A (POTS)
Cisco 1802 is for Annex B (ISDN)
12-04-2007 09:20 PM
The DSL is working with a 3rd party Router. Also the router is Cisco 1802, you can see the show version attached.
12-05-2007 03:39 PM
Hi, as suggested abouve the 1802 can be the wrong model for you DSL line, for "normal" DSL you need the 1801.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide