cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
492
Views
8
Helpful
3
Replies

DSL config

MAZakirhussain
Level 1
Level 1

I did the basic configuration for ADSL on router 1802. When I issue show int atm0, it shows the following.

ATM0 is initializing, line protocol is down

Hardware is MPC ATMSAR (with Alcatel ADSL Module)

Even for one full day it shows as initializing only. It does'nt become UP.

1 Accepted Solution

Accepted Solutions

it seems that you don't have a working dsl line (do you have checked this with another modem) or that you have the false router (Annex B [ADSL over ISDN] instead of Annex A [ISDN over POTS]) ...

Cisco 1801 is for Annex A (POTS)

Cisco 1802 is for Annex B (ISDN)

View solution in original post

3 Replies 3

it seems that you don't have a working dsl line (do you have checked this with another modem) or that you have the false router (Annex B [ADSL over ISDN] instead of Annex A [ISDN over POTS]) ...

Cisco 1801 is for Annex A (POTS)

Cisco 1802 is for Annex B (ISDN)

The DSL is working with a 3rd party Router. Also the router is Cisco 1802, you can see the show version attached.

Hi, as suggested abouve the 1802 can be the wrong model for you DSL line, for "normal" DSL you need the 1801.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: