I have got the following setup:
IOS version 12.4.(4)XC7 (CME version 4.0) with 7911G en 7940G phones.
We have the following problem : on 7911G, the time is right, however, on
2 7940, the time is incorrect. (1 hour difference)
Any idea how to troubleshoot on this ?
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version
12.4(4)XC7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 01-Aug-07 00:15 by alnguyen
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
CSPRAGUE2 uptime is 17 hours, 52 minutes
System returned to ROM by reload at 17:48:28 CET Mon Dec 3 2007
System restarted at 17:51:04 CET Mon Dec 3 2007
System image file is "flash:c2800nm-spservicesk9-mz.124-4.XC7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be
If you require further assistance please contact us by sending email to
Cisco 2821 (revision 53.51) with 237568K/24576K bytes of memory.
Processor board ID FHK0915F18G
2 Gigabit Ethernet interfaces
1 Serial interface
4 ISDN Basic Rate interfaces
1 terminal line
1 Channelized E1/PRI port
1 cisco service engine(s)
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
service timestamps debug datetime msec
service timestamps log datetime msec