Blocking incoming calls on CM 4.1(3)

Unanswered Question
Dec 4th, 2007
User Badges:
  • Bronze, 100 points or more

Is there anyway I can block a incoming call from a particular number. What would I need to do to prevent incoming calls from 973-xxx-xxxx? Is this possible with CM?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Aaron Dhiman Tue, 12/04/2007 - 08:04
User Badges:

It is possible if the call comes in on an H.323 Gateway. Not if the GW is MGCP, though.

mparekh Tue, 12/04/2007 - 08:18
User Badges:
  • Bronze, 100 points or more

It is coming over H323...what woud I need to do?

Aaron Dhiman Tue, 12/04/2007 - 08:08
User Badges:

It is possible if the call comes in on an H.323 Gateway. Not if the GW is MGCP, though.

jbarcena Tue, 12/04/2007 - 08:44
User Badges:
  • Red, 2250 points or more

It is not possible to do this with CCM, but as already stated you can do it with your H.323 Gateway, try the following:


Use Translation rules:


config t

voice translation-rule 1

rule 1 reject /#/

rule 2 reject /#/

*where # is the number that you wish to block.


config t

voice translation-profile BLOCK_NUMBER

translate incoming 1


Assign this translation profile to the incoming dial-peer that you are using.


Hope that helps, if it does please rate the post.


//Jorge

paolo bevilacqua Tue, 12/04/2007 - 08:53
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, in the example above, it should be:


voice translation-profile BLOCK_NUMBER

translate calling 1

Actions

This Discussion