CME & VG224

Unanswered Question
Dec 4th, 2007

I'm having hard time making the vgg224 work properly on the CME. Able to get calls through the vg224 but not able to make calls. In other words outgoing calls don't seem working.

Here is some of the running configs taken from both devices that might help you specify the problem:


interface FastEthernet0/0

ip address

ip nat inside

ip virtual-reassembly

duplex auto

speed auto


interface FastEthernet0/1

no ip address


duplex auto

speed auto



ip http server







voice-port 2/0

ren 3


loss-plan plan4


input gain 10

output attenuation 10

playout-delay minimum low

timing digit 53

description cflow1

music-threshold -50

bearer-cap Speech

station-id name GTS

station-id number 262

caller-id enable


ccm-manager config server

ccm-manager config

ccm-manager sccp local FastEthernet0/0

ccm-manager sccp



sccp local FastEthernet0/0

sccp ccm identifier 1



sccp ccm group 1

bind interface FastEthernet0/0

associate ccm 1 priority 1



dial-peer voice 1 pots

service stcapp

port 2/0

forward-digits all



voice-card 0





voice service pots


voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12



registrar server expires max 3600 min 3600




voice class codec 1

codec preference 1 g711alaw


Hopefully this will be clear to address the problem.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
kelvin.blair Tue, 12/04/2007 - 09:19

I have seen issues with IOS version on vg224 on SCCP configurations. What version of IOS are you running on the VG224 I would recommend 12.4.11XW

valides007 Tue, 12/04/2007 - 10:43

Well we have the 12.4.6XE1, but let me explain something i discovered recently.

The outgoing calls are working fine when i set up the analog phone to a pulse phone. The tone phone setup doesn't work.

Is this a common problem?


This Discussion