FXO port rollover?

Answered Question
Dec 4th, 2007
User Badges:

I have a 2811 router with CME 4.2 loaded, using 4 port FXO card. I started with just one analog phone line for the office, but now have an additional one. How can I get incoming and outgoing calls to move to which ever line is available?


Thanks.

Correct Answer by paolo bevilacqua about 9 years 6 months ago

Hi, use trunk groups.


voice-port x/y/z

trunk-group pots

connection plar XXX opx


dial-peer voice 100 pots

trunkgroup pots


Then you can do certain settings (translations, hunt scheme) under "trunk group pots".


Hope this helps, please rate post if it does!


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Tue, 12/04/2007 - 10:10
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, use trunk groups.


voice-port x/y/z

trunk-group pots

connection plar XXX opx


dial-peer voice 100 pots

trunkgroup pots


Then you can do certain settings (translations, hunt scheme) under "trunk group pots".


Hope this helps, please rate post if it does!


jstemke Tue, 12/04/2007 - 11:45
User Badges:

For the incoming calls to rollover, you will have to have the phone company setup a hunt group on the POTS lines.

Actions

This Discussion