12-04-2007 10:00 AM - edited 03-15-2019 07:35 AM
I have a 2811 router with CME 4.2 loaded, using 4 port FXO card. I started with just one analog phone line for the office, but now have an additional one. How can I get incoming and outgoing calls to move to which ever line is available?
Thanks.
Solved! Go to Solution.
12-04-2007 10:10 AM
Hi, use trunk groups.
voice-port x/y/z
trunk-group pots
connection plar XXX opx
dial-peer voice 100 pots
trunkgroup pots
Then you can do certain settings (translations, hunt scheme) under "trunk group pots".
Hope this helps, please rate post if it does!
12-04-2007 10:10 AM
Hi, use trunk groups.
voice-port x/y/z
trunk-group pots
connection plar XXX opx
dial-peer voice 100 pots
trunkgroup pots
Then you can do certain settings (translations, hunt scheme) under "trunk group pots".
Hope this helps, please rate post if it does!
12-04-2007 11:45 AM
For the incoming calls to rollover, you will have to have the phone company setup a hunt group on the POTS lines.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide