Router 3660 PPPoE BRAS

Unanswered Question
Dec 4th, 2007
User Badges:

I'm configuring C3660 for PPPoE subscribers. I'm just trying to use feature ”range [range-name] pvc start-vpi/start-vci end-vpi/end-vci” under ATM interface configurations.


Router(config)#interface atM 1/0.4 multipoint

Router(config-subif)# Here I can't find “range” command.

Router(config-subif)#


I tried different IOS version 12.2 and 12.3, but it did not help. I'm running now with c3660-telcoentk9-mz.123-22.bin. Can someone please confirm the support of range command under ATM interface in 3600 series routers.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Paolo Bevilacqua Tue, 12/04/2007 - 12:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


these BRAS features are found in 12.2SB, but there is no released image for the 3660.


Hope this helps, please rate post if it does!

jahilnt10 Tue, 12/04/2007 - 12:26
User Badges:

In case I just want to use range command feature under ATM configuration. Is it necessary to get 12.2SB. ATM range command feature is an important feature and I would it should not be with specific release.

Paolo Bevilacqua Tue, 12/04/2007 - 14:06
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


according to the documentation, the command is supported only on 12.2 SB and consequently only on the platform supporting 12.3 SB.

Actions

This Discussion