Router 3660 PPPoE BRAS

jahilnt10 · ‎12-04-2007

I'm configuring C3660 for PPPoE subscribers. I'm just trying to use feature â€range [range-name] pvc start-vpi/start-vci end-vpi/end-vciâ€ under ATM interface configurations.

Router(config)#interface atM 1/0.4 multipoint

Router(config-subif)# Here I can't find â€œrangeâ€ command.

Router(config-subif)#

I tried different IOS version 12.2 and 12.3, but it did not help. I'm running now with c3660-telcoentk9-mz.123-22.bin. Can someone please confirm the support of range command under ATM interface in 3600 series routers.

paolo bevilacqua · ‎12-04-2007

Hi,

these BRAS features are found in 12.2SB, but there is no released image for the 3660.

Hope this helps, please rate post if it does!

jahilnt10 · ‎12-04-2007

In case I just want to use range command feature under ATM configuration. Is it necessary to get 12.2SB. ATM range command feature is an important feature and I would it should not be with specific release.

paolo bevilacqua · ‎12-04-2007

Hi,

according to the documentation, the command is supported only on 12.2 SB and consequently only on the platform supporting 12.3 SB.